Let’s put a bail on a silver pendant (MPSS2124BR). Open a split rings (FMRS8S-144) and slide the silver pendant onto the split rings. Set aside.
Cut a1.5 inches and two 8in. pieces leather cord (BCRL15LBR-50M).
On each end of each cord, put a drop of hypo cement (TLGSHYPO01). Insert onto the cord end cap (FMCE18S-144). Let it dry.
On the other end, repeat step three. Set aside.
Cut a 1.5in.silver filled wire (SFBW22S). Let’s make a bead link unit. On one end, make a wrapped loop and slide a shell bead (TC3106N). Finish with a wrapped loop on the other end. Trim off excess wire. Set aside.
Get the 1.5in.leather cord, with the cord end caps attached, slide the bail of the silver pendant onto the cord.
From the pendant going to the left end of the 1.5in.cord use an open jump (FMRJ4S-144) to attach the cord end cap and one end of the bead link unit.
Take the 8in. leather cord. Use another jump ring (FMRJ4S-144) to attach the other end of the bead link unit and one end of the 8in. leather cord.
Attach the other end of an 8in. leather cord to a six pieces open jump ring (SSRJ6-100).
On a head pin, string a shell bead. Make the first half of the wrapped loop, attach to the last split rings and finish the wraps.
Repeat Step seven up to step ten on the other end. Substitute the five pieces open jump ring and the wrapped loop with shell bead with a lobster clasp (FMCLLXSMS-144).
List of Materials:
1 pc. MPSS2124BR silver thatched hammer pendant oval brownlip shell inset
1 pc. FMRS8S-144 silver plated split rings
6 pcs. FMCE18S-144 silver plated tube cord end caps
7 pcs. SSRJ6-100 open ring
4 pcs. FMRJ4S-144 open ring
1 pc. FMCLLXSMS-144 silver plated lobster clasp 2 pcs. 1.5in. SFBW22S silver filled wire dead soft
3 pcs. TC3106N natural round mother of pearl shell beads
1 pc. SFPH020x15-100 silver filled head pins
2 pcs. 8.25in. BCRL15LBR-50M light brown round leather cord
1.5 in. BCRL15LBR-50M light brown round leather cord
1 tube TLGSHYPO01 g/s hypo cement