N-0019
STEP 1:
Let’s find the center of a 40in. leather cord (BCRL15LBR-50M).
STEP 2:
On one end of the cord, slide a wood bead (EXS1528MC). Place it at the center.
STEP 3:
From the center extending to the left end of the cord, string a seven pieces saucer bead (WD1604BY), round wood (EXS1317MC), six pieces saucer beads, a yellow/orange wood (EXS1312YO) and a five saucer beads.
STEP 4:
Arrange the saucer beads, the round wood bead, the yellow/orange wood and the saucer beads randomly. Put a drop of hypo cement on each saucer bead (TLGSHYPO01). Let it dry.
STEP 5:
From the center going to the right end of the cord, repeat steps three and four. Set aside.
STEP 6:
Cut a 28in. leather cord (BCRL15LBR-50M) and find its center.
STEP 7:
On one end, slide a round wood (EXS1317MC). Put this bead at the center of the cord.
STEP 8:
String a seven pieces saucer beads, a wood bead (EXS1528MC), a six pieces saucer beads, a yellow/orange wood (EXS1312YO) and four pieces wood beads onto the cord. Arrange these beads randomly. Apply a drop of hypo cement. Let it dry.
STEP 9:
Repeat step eight on the other end.
STEP 10:
Hold each end of both a 40in. and a 28in. cords and put a drop of hypo cement. Insert onto the cord end cap (FMCE27S-144). Let it dry. Repeat on the other end.
STEP 11:
On the left end of this necklace, use a jump ring (FMRJ6S-144) to attach the cord end cap and the toggle (FMCLTOG1S-144).
STEP 12:
On the other end, use an open jump ring to attach the cord end cap and a bar (FMCLTOG1S-144). Close the jump ring. This piece of jewelry is now finished.
List of Materials:
3 pcs. EXS1528MC multicolor wood squash design
3 pcs. EXS1317MC multicolor round wood
4 pcs. EXS1312YO yellow/orange round wood combination
70 pcs WD1604BY bayong saucer Wood Beads
28 in BCRL15LBR-50M light brown round leather cord 40 in. BCRL15LBR-50M light brown round leather cord
2 pcs. FMCE27S-144 silver plated tube cord end caps
2 pcs. FMRJ6S-144 open jump ring
1 pair FMCLTOG1S-144 silver plated toggle clasps
1 tube TLGSHYPO01 g/s hypo cement