N-0140 (NECKLACE)
STEP 1:
On a head pin (FMGPPH028x2-72), string a panyas seed (CN006N) and an anipay seed (CN022). Make the first half of the wrapped loop. Make five bead units. set aside.
STEP 2:
This is optional, you can use a 22 guage artistic wire isntead. Prepare six pieces head pin (FMGPPH028x2-72). Trim each head using wire cutter.Make a wrapped loop on one end. Slide a seed bead and make another wrapped loop on the other end. Make four anahaw seed (CN013) connectors and two anipay seed connectors.
STEP 3:
Slide the inlaid shell pendant (SP2040BL-G) onto a 5in. suede lace (BCSF28BR-25). Hold both ends of the suede lace and slide a suede end caps (FMSEG-144). Close the suede end cap.
STEP 4:
Attach the two anahaw seed connectors and one anipay seed connector in alternate position using a split rings(FMRS8G-144). and attach to the to the suede end cap.
STEP 5:
Cut an 8in. suede lace. Slide a suede end cap on one end. Close the suede end cap. Repeat on the other end with a split rings(FMRS6G-144), three jump rings(FMRJ4G-144) and a toggle bar (FMCLTOG9G-144).
STEP 6:
Attach step four and step five.
STEP 7:
Redo step five. Use 4in. and 2in. lengths suede lace without rings and bar.
STEP 8:
Attach each end to the split rings in between the 8in. suede lace and anahaw seed connector.
STEP 9:
On the other ends attach panyas and anipay seed bead unit. Finish the wraps. Trim excess wire.
STEP 10:
Repeat steps three up to nine substituting three rings and bar with one ring and toggle ring(FMCLTOG9G-144).
STEP 11:
Open two jump rings and slide the pendant. Close the jump rings.
STEP 12:
To finish this project off, attach the last bead unit to the jump rings and finish the wraps.
List of Materials:
1pc. SP2040BL-G shell inlay
7pcs. CN022 ‘anipay’ seeds
4pcs. CN013 ‘anahaw seeds’
5pcs. CN006N ‘panyas’ seeds
8pcs. FMRS8G-144 split rings
2pcs. FMRS6G-144 split rings
12pcs. FMSEG-144 suede end caps
11pcs. FMGPPH028x2-72 head pins
4pcs. FMRJ4G-144 open jump rings
2pcs. FMRJ10G-144 open jump rings
1pair FMCLTOG9G-144 toggle clasps
38in. BCSF28BR-25 suede lace
E-0140 (EARRINGS)
STEP 1:
On a head pin (FMGPPH028x2-72), string a panyas seed (CN006N) and an anipay seed (CN022). Make the first half of the wrapped loop.
STEP 2:
Make an anahaw seed connector.See step two of the necklace.
STEP 3:
Attach the bead unit and one end of the connector. Complete the wraps.
STEP 4:
Attach the other end of the connector and the loop of the earring(FMEW001G-144) using (FMRJ6G-144) jump ring.
STEP 5:
Repeat step one up to four to the other pair of the earring to finish this project.
List of Materials:
2pcs. CN022 ‘anipay’ seeds
2pcs. CN013 ‘anahaw seeds’
2pcs. CN006N ‘panyas’ seeds
4pcs. FMGPPH028x2-72 head pins
2pcs. FMRJ6G-144 open jump rings
2pcs. FMEW001G-144 ear wire